Automatic DC Terminal Crimping Machine
Patent No: ZL 2010 1 0531665.7 ( This product has been patented, and coping is prohibited )
Wire stripping and pressure connection are co,pleted once for all. Equipped with automatic oil feed unit, 3-5 labors are saved compared with original operating mode, with advantage of reducing accidents, saving labor, improving output and being safe and environmentally friendly.
automatic DC plug and play terminal DC cable plug; comprising contacting the exposed portion of the metal inwardly insulating jacket conduit housing, a metal injection molding and the metal contacts of the pole contacts formed in the ferrule;
laterally contiguous set of metal contacts, set up semi-circular contacts and contacts within the bomb by two connecting pieces, connecting piece contiguous transverse position set close to the wire riveting bit;
within the ferrule is inserted in the insulation jacket shell, semi-circular contacts with the outer housing of the contact part is set in a half ring riveted contacts and contacts within the elastic connecting piece through automatic fighting machine will need to connect the two wire ends are playing to the above, the protection of closely connected, avoid the problems caused by welding quality problems, improve production efficiency;
laterally contiguous when forming a contiguous whole DC plug cable, you can set the disk material discoid, improve efficiency and save production costs.
|Model of machine||SD-3000DC|
|Pressure connection speed||2,300~2,400pcs/hour|
|Holding force on plug range||80-250N|
|Stripping length of outer jacket||As per customer's requirements can be adjusted|
|Stripping length of conductor jacket||As per customer's requirements can be adjusted|
|Pressure of air source||0.5~0.8Mpa|